Parking Counting System Controller PCS-300
Parking Counting System Controller PCS-300
An important integral part of the parking guidance system
Parking Counting System Controller PCS-300 is used in the networking of the parking guidance system, connected to the parking space detectors, guidance screens, etc., to complete the work of data collection, reporting, and downloading the commands and data of the main controller. The location parking guidance system can effectively guide and manage the parking vehicles entering and exiting the parking lot. It is a powerful supplement to the parking lot management system and constitutes a more intelligent parking lot management system.
Key Features:
- Detect whether there is a vehicle passing by, and recognize the direction of the vehicle automatically;
- Set or modify the total number of parking spaces and the available lots in a certain area;
- Calculate and display the available lots in the area;
- Support data collection and correct display results;
Specification:
Input Power | AC110/220V ± 10% 50/60Hz |
Language | CN/EN |
Operating Temperature | -40℃~+85℃ |
CAN Interface | Full duplex, safe electrical isolation, communication speed 10Kbps, communication distance up to 5km or more |
RS485 Interface | Half duplex, baud rate 9600bps (8N1) |
TCP Interface | Full duplex, 100Mbps |
Detection Sensitivity | 0~9 levels adjustable |
Max. Detected Signal Exist Time | 3-255S Adjustable |
Loop Induction Range | 80-300uh |
Applicable Vehicle Speed | 5~60km/h |
Conditions Of Use | Only for single lanes with a road width of 2 to 4 meters |
- Communication: CAN Bus;
- Size: 350*120*420mm(W*T*H)
- Shell material: gray cold steel paint
- Size: 350*120*420mm(W*T*H)
- Shell material: gray cold steel paint